[ Pobierz całość w formacie PDF ]

ÿþSPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
PETROL X
VOLVO V 70* 02 ’! DIESEL
’!
MAKE MOD. YEAR.
* Models with original equipment keyless entry system.
ALARM/SIREN Position the compact alarms and the sirens on the support of the servobrake, in the engine
POSITION compartment.
CENTRAL UNIT POSITION Position the modular systems and the modules under the driver s side dashboard.
POWER SUPPLY + 30: connect directly to the positive end of the battery.
- 31: connect directly to the car body.
IGNITION WIRE +15/54: connect to the BLUE wire, at the position nr. 9, on the fuse box, on the side of the dashboard,
driver s side.
DIRECTION INDICATORS Connect to the GREEN and GREEN/WHITE wires, in the grey connector, located on the left, under
the dashboard.
ELECTRIC WINDOWS Positive control signals
Front window, drivers side:
cut the VIOLET wire, at the position nr. 4, in the 12 way grey connector, in the driver s side switches
panel.
Front window, passengers side:
cut the VIOLET wire, at the position nr. 4, in the 12 way grey connector, in the driver s side switches
panel.
Rear window, drivers side:
cut the GREEN/BROWN wire, at the position nr. 1, in the grey connector, marked MI24, behind the
relay holder form, under the driver s side dashboard.
Rear window, passengers side:
cut the GREEN/BROWN wire, at the position nr. 1, in the grey connector, marked M1, behind the
relay holder form, under the driver s side dashboard
ACTIVAT./DEACTIVATION Connections antithefts/vehicle
CONTROLS Art. 3800 Vehicle Position
YELLOW/BLACK YELLOW pos. nr. 2 in the grey connector
GREY/BLACK GREY pos. nr. 6 in the grey connector
VIOLET BLUE pos. nr. 13 in the green connector
ORANGE LIGHT BLUE/WHITE pos. nr. 12 in the green connector
VIOLET/WHITE ground car body
ORANGE/WHITE positive positive of power supply.
The connectors: grey at 12 way and green at 30 way, are located on the coming out of the switches
panel, directly inside the driver s side door.
Refer to diagram nr. 159.
IMMOBILISATION POINT Fuel pump
Cut the LIGHT BLUE wire, at the position nr. 7, on the MI 12 connection, behind the relay holder
plate.
STARTER +50: cut the 0,35 mm2 YELLOW/WHITE wire located in the left part of the connector fixed on the
central, under the driver s side dashboard.
BONNET SWITCH Install an additional switch on the front headlamp support plate.
DOORS SWITCH Connect to the WHITE wire of the lamp that enlighten the pedals.
Note: the front lamp is at positive polarity.
BOOT SWITCH Connect to the WHITE wire of the serial boot lamp.
Note: the boot lamp is at positive polarity.
vov7002gbbt.doc
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
FITTING DIAGRAM N°159
Diagram to connect art. 3800 on
VOLVO V 70 year 2002
3800 Serie
VIOLET/WHITE
GREY/BLACK GREY pos. nr.6
grey
YELLOW/BLACK YELLOW pos. nr.2
connector
ORANGE/WHITE
VIOLET
+ 30
Diode 1N 4006
green
ORANGE
connector
BLUE pos. nr.13
LIGHT BLUE/WHITE pos. nr.12
Diodes 1N 4006
vov7002gbbt.doc
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual. [ Pobierz całość w formacie PDF ]