[ Pobierz całość w formacie PDF ]

Using default environment
In: serial
Out: lcd
Err: lcd
mbox: Timeout waiting for response
bcm2835: Could not set USB power state
Net: Net Initialization Skipped
No ethernet found.
Hit any key to stop autoboot: 0
reading uEnv.txt
** Unable to read file uEnv.txt **
reading boot.scr
** Unable to read file boot.scr **
Page 5 of 8
QNX 6.5.0 SP1 Setup Manual for Raspberry PI board
3.2.8 Step 8: Load QNX 6.5.0 image to the board.
Enter command as bellow to start up QNX 6.5.0:
=>fatload mmc 0 0x00200000 ifs-bcm2835.bin; go 0x00200000
3.2.9 Step 8: Boot up finish.
Wait for a while to see QNX 6.5.0 image is booting up &
Page 6 of 8
QNX 6.5.0 SP1 Setup Manual for Raspberry PI board
4. Test driver
4.1.1 Serial driver:
Make sure can type some commands.
4.1.2 SD driver:
Make sure /dev/hd0 is created in file system by command:
# ls /dev/
4.1.3 Graphics driver:
Make sure QNX 6.5.0 background image is shown on the HDMI LCD:
Page 7 of 8
 Page 8 of 8
REVISION HISTORY QNX 6.5.0 SP1 Setup Manual For Raspberry PI Board
Description
Rev. Date
Page Summary
1.00 Jul 23, 2014 - First release [ Pobierz całość w formacie PDF ]